| MODEL |
103-FC |
303-FC |
373-FC |
503-FC |
603-FC |
653-FC |
803-FC |
104-FC |
| Capacity |
1kVA |
3kVA |
3.75kVA |
5kVA |
6kVA |
6.5kVA |
8kVA |
10kVA |
| INPUT |
| Voltage |
1P, 100~120V or 200~240Vac |
1P, 220Vac -15%, +25% |
| Frequency |
50Hz or 60Hz ± 5% |
OUTPUT |
| Voltage |
1P, 220Vac ± 5% (Adjustable) |
| Frequency |
50Hz or 60Hz, 400Hz (Option) ± 0.5% |
| Voltage Regulation |
± 1% |
| Frequency Stability |
± 0.5% (Free running) |
| Transient Response |
± 3% (100% Load variation) |
| Waveform |
Sine wave |
| Distortion |
< 3% at 0~100%(Linear load) |
| Overload Capacity |
105%: 30 sec, 150%: constant power |
120~150%: 30 sec, >150%: constant power |
| Power Factor |
0.7-1, lag |
| Crest Ratio |
3:1 |
EFFICIENCY |
| AC to AC |
>85% |
PROTECTION |
| Overload |
105%: 30sec |
120%: 30 sec |
| Short Circuit |
Current limited and cut-off and fuse and breaker |
| EMI/EMC |
EN50091-2, CE approved |
AUDIBLE ALARM |
| Mains Failure |
Sounding every four seconds after mains fail, 90 seconds mute |
| Optional Battery Low |
Sounding once every second as optional battery low level approaches |
Sounding once every second as battery approaches |
| Overload & UPS Fault |
Continuously |
INDICATOR |
| LCD |
I/P&O/P voltage/ frequency |
I/P&O/P voltage/frequency, loading %, history record |
| LED |
50Hz, 60Hz, overload, fault |
Utility LED (Green), inverter LED (Green), fault LED (Red), overload (Yellow) |
INTERFACE |
| Contact Closure |
Support MEGATEC RUPS UPS monitoring software |
| RS-232 |
Support MEGATEC RUPSII / UPSilon 2000 monitoring software |
ENVIRONMENT |
| Operation Temperature |
0-40 ℃(32-104 ℉) |
| Relative Humidity |
0-90% (non-condensing) |
| Audible Noise(At 1M) |
< 45dBA |
PHYSICAL |
| Net Weight(kg, without battery) |
20 |
30(400Hz);65(50 or 60Hz) |
60 |
66 |
69 |
94 |
115 |
116 |
| Dimension (WxHxD)mm |
180 x 308 x 381 |
180 x 360 x 500 (400Hz) ,
180 x 500 x 540(50 or 60Hz) |
230 x 685 x 578 |
480 x 845 x 340 |
| ✽ All specifications mentioned above are subject to change without prior notice |
| MODEL |
3104-FC |
3124-FC |
3154-FC |
| Capacity |
10 kVA |
12 kVA |
15 kVA |
INPUT |
| Voltage |
3P3W, 220V or 3P4W, 220/380V,-15% +25% |
| Frequency |
50Hz or 60Hz ± 5% |
OUTPUT |
| Voltage |
1P, 220Vac ± 5% (Adjustable) |
| Frequency |
50Hz or 60Hz, 400Hz (Option) ± 0.5% |
| Voltage Regulation |
± 1% |
| Frequency Stability |
± 0.5% (Free running) |
| Transient Response |
± 3% (100% Load variation) |
| Waveform |
Sine wave |
| Distortion |
< 3% at 0~100%(Linear load) |
| Overload Capacity |
120%: 30 sec, >150% constant power |
| Power Factor |
0.7-1, lag |
| Crest Ratio |
3:1 |
EFFICIENCY |
| AC to AC |
>85% |
PROTECTION |
| Overload |
125%: 30 sec |
| Short Circuit |
Current limited and cut-off and fuse and breaker |
| EMI/EMC |
EN50091-2, CE approved |
AUDIBLE ALARM |
| Mains Failure |
Sounding every four seconds after mains fail, 90 seconds mute |
| Final Discharge |
Sounding once every second as battery approaches |
| Overload |
Continuously |
INDICATOR |
| LCD |
I/P&O/P voltage / frequency, loading %, history record |
| LED |
Utility LED (Green), inverter LED (Green), fault LED (Red), overload (Yellow) |
INTERFACE |
| Contact Closure |
Support MEGATEC RUPS UPS monitoring software |
| RS-232 |
Support MEGATEC RUPSII / UPSilon 2000 monitoring software |
ENVIRONMENT |
| Operation Temperature |
0-40 ℃(32-104 ℉) |
| Relative Humidity |
0-90% (non-condensing) |
| Audible Noise(At 1M) |
< 45dBA |
PHYSICAL |
| Net Weight(kg, without battery) |
116 |
120 |
200 |
| Dimension (WxHxD)mm |
480 x 845 x 340 |
480 x 885 x 380 |
| ✽ All specifications mentioned above are subject to change without prior notice |
|
